remote start with long press on lock button

Question

I install evo-all on LC200 . The car is starting with 3x lock and with longer pressing on lock button.why?

Answer 1

Normally this means the vehicle is equipped with an OEM remote starter. The toyota sequence is lock 3x and holding the 3rd press for 3 secondes.

Comments

no, not the 3rd press. the 1st press for long, on the lock button, locks the doors and windows. windows are comming to lock, up to 10 sm, and after 5 seconds, the vehicle is starting

---

So the vehicle starts with one press of the lock button if you hold it for 10 seconds?

---

sounds like the oem remote sends 3 lock commands when the button is held down. The doors may not be locking 3 times, but the command itself is being sent 3 times. Luckily the evo has diagnostic LEDs right on top of it.

The blue led will flash once per lock press. So on a typical remote start with 3x lock, you would see 3 blue led flashes. If the blue led is flashing 3 times when you press and hold the lock button, the issue is related to how the vehicle iinterprets holding down the lock button.

---

when wants lock the window from keyfob (comfort closure), and holding lock button on the oem remote, windows closing only 10 sm (release the lock button or not release too), then standing and after 5 sec. the vehicle is starting

---

What can I do now? Owner needs to close the windows with keyfob.

---

If you want to use the oem keyfob to do other things on the vehicle, you have 2 options

1. set unit to option D1.1 (lock-unlock-lock) this will eliminate that the evo unit sees 3lock signals when client is holding the lock button down.

OR

2. turn off option C1 (oem remote monitoring) but you will also lose 3xlock and will have to use the lc200 remote control.

 

Thank you

---

that's what I wanted to do(1.), but wait until the client. I will write about the rezult...

---

Client has come. I set the lock-unlock-lock, and everything was fine. Thank you for attention.