2012 Toyota Camry SE will not Remote Start

Question

I have installed the EVO-One, Thar-One-Toy4 T-harness and Programmed the One with option D2. Installed unit, programmed the unit per guide #71411 and still the unit will not remote start. I have done everything in the Guide and I even turned off the Valet Mode, but I still don't get any remote start from the unit. No lights on the unit are illuminated constantly and no lights flash when using the Factory remote to remote start the vehicle. Does this unit need a seperate remote to remote start the vehicle? Do I need to program the EVO-One to use the Factory Remote? There is no instructions on needing to program the unit to the factory remote. The main reason for this install, was to use the Factory Remote to remote start the vehicle.

Answer 1

Remote start from the factory remote is not supported on this vehicle as stated on the website: http://fortin.ca/en/vehicles/toyota/camry/2012-g-key/

 

You will need a rf kit to control the remote starter.