Why does the car start by itself?

Question

https://cdn02.fortin.ca/download/59931/evo-all_ig_sal_en_ren_fluence_2009-2015_keycard_b_59931.pdf

Car - Renault Scenic III 2014

After installing the system according to the diagram, everything works fine, but the car starts itself when you leave with the key (hands free).

the doors are locked, the mirrors are folded, everything is as usual - but then the car starts itself.

that is, fortin somehow perceives the signal to close the car through the hands-free system as a signal to start the starter.

why is that?

Answer 1

Отвечаю на русском - кому нужно переведет.

Машина сама заводится если у Вас включено автоскладывание зеркал.

Почему то блок Fortin воспринимает сигнал от сложенных зеркал за команду запуска двигателя.

Answer 2

make sure the yellow/black is not touching anything that is grounded.

the module reads CAN-BUS for the lock commands and will flash the blue led once. If there is anything passing on CAN-BUS that replicates lock, the car will start.

Comments

https://fortin.ca/en/qa/94108/two-questions-about-evo-all-renault-fluence-2010-keycard?show=94108#q94108

 

nothing is confused, everything is connected as needed.

here is a topic from another person with the same car, with the same problem, no one answered in it.

at the moment, I see that we both have firmware version v72.33

I'll try to flash v72.22 and tell you how it ended.

---

changing the firmware did not help.

I'll try later to change the launch combination to close-open-close, it may help.