2016 nissan altima push to start. Ordered the fortin rs. Right coner says Nisa4

Question

I'm using diamgra 75881. Not understanding the wire hook ups. I see the black and red get sliced into the pcm on the white connector. The diamgra I'm looking at says stuff about unlock,lock. And start,stop external. Am I using the right guide?

Answer 1

Yes, that is the correct guide.

The only thing you need to do is cut the white 15 pin connector off and wire in power and ground where shown in the guide.

 

Otherwise there is nothing else than plugging in the t-harness.

 

The dotted lines for lock/unlock/start/stop are not needed don't connect them.

Comments

On the 15 pin connector I'm cutting it all off and wiring 1 and 5 up. Or am I just cutting the 1 and 5 wire and leaveing the rest.

---

you are completly cutting off the connector and wiring in power and ground.