Red ligt not flsh

Question

I have installed avoall and have used the REV scheme: 20171221 and verified all connections 1 When I set up the machine the red color is fixed at the start 2 Do not start the vehicle if the key is in the coil Do I have to return it I got the settings evoall by Flash Link Updater 2 and what are the correct settings ?

Answer 1

Looking up the service number, there's something not right with the datalink and options. https://fortin.ca/en/support/001a06752879/

 

Please do the following. 

• Turn of Settings Protection option in the EVO-ALL
• RESET the EVO-ALL following this procedure: https://cdn.fortin.ca/en/download/61931/61931.pdf

 

Once that is done, I dont know which remote starter is being used, but be sure to set the proper datalink protocol, options F1,F2 or F3 in the EVO-ALL, and whatever option it is in the remote starter. They must match.

 

Then attempt to reprogram the unit.

Comments

remote starter is being used crime stopper RS00-G5

I have done all that you have said to me

View and check datalink and options

Now the red color is flashing but the key does not respond when you start

Answer 2

When you let go on red and plug in all connectors and turn the key on what does the red light do?

 

This is for a 2012 fj cruiser G-Key correct?

Comments

Hi Yes 2012 fj cruiser 2012 g-key Red light Nothing changes after ignition start It stays constant without any change