2010 Toyota Venza PTS EVO-ALL stand alone

Question

Hi,

I'm at the programming procedure, after plug in the remaining connectors. I Press the Push-to-Start twice. I only get a RED LED flashing rapidly and constantly.

But if I push the programming button, it will flash the BLUE LED rapidly. Then push the programming button again will flash the BLUE and YELLOW. Finish the programming but lock 3x does not do anything.

I'm on firmware 79.39 with no T-harness

Thanks

Answer 1

As per the guide you should let go on blue.

Then turn the ignition to the ON position, the blue led will begin to flash rapidly (if your connections are ok)

Then you press the programming button once and yellow/blue will flash, then you turn off the ignition.

Programming guide: http://fortin.ca/download/25081/evo-all_ig_sal_bi_toy_venza-nkto_e_25081.pdf