EVO-CHR.T5 not starting 2015 Jeep Compass

Question

EVO-CHR.T5 with the harness, wired up per diagram C for my 2015 Jeep Compass. Unit packaging included a notice that it had been configured for standalone remote start, with D1, C1, D2, F2, and H3 enabled.  Connectors plugged into unit are the red connector, the 5 pin connector from harness with the 2 grey wires, the 4 pin datalink plug is the one that has a red and black wire connected to harness, the blue and white go nowhere. yellow and purple wires go to the 20 pin connector, yellow and green/red respectively.
3X lock does not start the car, and no lights on the unit light up.

Answer 1

Oops. You can delete this question. I did not see the programming instructions. Now that it's programmed, it works like a charm!

Comments

glad to hear!