2008 Ford Edge- EVO-ALL standalone No brake shutdown

Question

Just finished (almost) a 2008 Edge \. EVO-ALL FORT1 XL202  everything works with the exception of the brake shutdown. After key takeover, drive, remove key EVO-ALL is still acive vehicle will not shut down without using the remote. The CANbus works for everythig else, just the brake isn't present

 

I spent an hour on the line with Moe..... he needs raise. Never solved the isue but we came up with a great work around.

Answer 1

I have seent this. Make sure the Can-Bus wires are Grey/Orange and violet/orange. It's possible that they are not in Pin 3 and 11 but in pin 6 and 11.  i think you already went through this with Moe though.

Option B2 should also be disabled in the options.

Comments

The Bus wires were correct and verified for voltage.

B2 is off.

No solution to the brake mystery tho.