2006 Ram diesel intake heater (glow plug) monitoring

Question

Does the Evo-All have the ability to monitor the intake heater (glow plug) for remote starting?  I see that I can set it for diesel mode, which would then delay the start signal for 0/10/20 seconds, but would rather just have it start as soon as the light in the dash turns off if possible.  Thank you!

Answer 1

Detecting glow plugs through data is not available in those years. In the newer RAM trucks, glow plugs are monitored through Can-Bus.

The EVO-ALL stand alone starter feature has a fixed time of about 10 or 20 seconds, i forget which.

The EVO-ONE has programmable option of 0-10-20 seconds.

If you want to be able to monitor directly the glow plugs. You would need a remote starter brain with an analog glow plug input; you would still need the EVO-ALL afterwards for transponder bypass. We do not have a remote starter with an analog glow plug input so some internet researching will be necessary.