Still not working

Question

I have tried every option you have given me.  Nothing worked.  I ended up putting a brand new EVO ALL module in with the news software available and programmed right away and worked a few times.  However customer called later on and says that now it only works every other time.  First it cranks for about 10 seconds and stops then on the customer restarts and it works.  We programmed the tach wire since it's a diesel.  Any ideas?

Answer 1

If using datalink with your Autostarts/Prostart, do not use the Fortin datalink protocol. Leave the Autostart to factory Expresskit, and with the latest EVO-ALL firmware, go in the options menu and Turn on option 21.3.

Also, if the vehicle has a factory alarm and you set the remote starter to unlock before / relock after start, remove that option. Let the EVO do it by activating option 12 in the EVO options menu.