2013 jeep compass evo all and tharness wont start

Question

Using evo-chrt5 install c I have installed all of the harness, not including the yellow/blk, brown/white, and dark blue. The unit seems to program properly but wobt start. The blue light comes on when I hit the lock button but nothing happens. The firmware version is 74-17 hardware version 6

Answer 1

http://fortin.ca/en/support/001a06462687/

 

There's no options for 3x lock start selected in the unit.

Comments

What do I have to do to make it work? I thought it was built in. I do have another car starter but I would rather the 3x lock

---

If you have a remote starter, you can connect it to the Evo All, you might have to connection B (wire to wire) if you do not have a compatible remote starter datalink protocol.

Or if you want 3x lock start, you will need to purchase a Flashlink-2 programmer and download the Flashlink manager program to be able to change options in the Evo All.