what am i missing for altima 2010 pts

Question

ive installed the evo all with nist harness flawlessly on a 2012 altima. short story long, i ordered same setup for a 2010 from another dealer.  wired the same way according to oem diagram, would not start car.  i sent back to have module reflashed according to specs such as bypass on.  module was sent back, i tried programming mod, it flashes correctly but when i hit the lock three times, i just get blue flashes, not red.  car dont start.  am i missing anything or is the programming not correct in flash

Answer 1

The service numberon the back of the unit will answer that question.

Comments

001a06 148248

---

claims to be evo all can bus intfc mod hrdwre vr 6, firm v 4.09, date 01-13 type 2

---

Options C1 and D1 needs to be enabled in your evoall options. If you install more modules youi should really consider getting a flashlink updater.

---

10 4 thats what i thought according to the guide.  must not have been flashed correctly

---

It seems to be flashed to the right firmware, but the options are not on. You can check for yourself here : https://fortin.ca/en/support/001a06148248/