2011 VW Tiguan 3x lock won't start c1,d1 already enable

Question

Ok so I got a Evo-one for my wife's 2011 VW Tiguan everything is hooked up correctly the diagram that is provided through you is slightly different 2009 and 2011 have differences in wiring , now I see the module doing its job which is tying to start the vehicle but nothing turns over on the veicle side the only thing it does is lock and unlock , now it says on the diagram to put it on function 31 mode 4 , is that something that would of switch over with the flash, If I need to switch it my self how would I do that with the factory remote ???

Answer 1

connect your evoone to flashlink updater in REMOTE STARTER mode. Press 'O' on your keyboard (before connecting the evo-one), scroll down to option 38 and put this option to mode 2, click save at top of page and wait for page to close.

Comments

Also, turn OFF D1 in the bypass options.

---

Ok thanks a lot , now it starts , one more question how do I get the remote to unlock while the vehicle is on , the remote won't function while the car is on , thanks

---

By factory, the remote does not work while the vehicle is started. It's written in the guide and the website that the remote will not function on remote start. Unfortunately, there is no way around this.

---

Ok thanks , now what if I get one of those rf antennas with remote would that work ???

---

lock and unlock from an aftermarket remote would work while the car is started

---

Nice and one last question , the car shuts of when I open the door is there a setting or function mode so it stays on while the door is open ??? Thanks a lot you guys been a great help !!!

---

the module needs to be able to detect the unlock in order to have the vehicle stay on. it shuts down as security feature.