It says to put lock and unlock wires in empty pin spots in BCM plug??

Question

How do i put wires into empty pin slots in BCM plug

Answer 1

Hello,

 

If using a t-harness (nist1) there a pins on the wires from the evo t-harness to pin the bcm. be sure to remove the locking tab on the oem connector to insert them all the way then re isntall tab.

 

If hardwiring you can sometimes fold the wire over in the connector to get it to make contact this can be tricky as you cannot let it touch any other pins in the connector.

 

Best regards.