Fortin Start 2 is not working with Fortin Evo One

Question

Toyota CHR 2019 key start.
The phone app say the car is started but it is not.
When i use oem remote to start by pressing 3 times the lock button the car starts but then i unable to unlock with the oem remote. I have to manually use the key to open the car

Answer 1

The TPMS connection in the guide is to allow the keyless to work while the engine is running. Verify that connection. Also, try using firmware 79.59. https://fortin.ca/download/88831/evo-one_ig_thr_bi_toy11-c-hr_2018_hkey_a_88831.pdf

 

For the EVo-START, you need to pair the antenna to the EVO following the procedure in the EVO-START installation guide. Make sure to press UNLOCK on the OEM remote before doing the pairing procedure.

https://fortin.ca/download/69731/evo-start-2-install-guide-69731.pdf