2018 Subaru Crosstrek - to hook up yellow/red wire & the yellow/green wire to the immo data

Question

At the junction box, on pin 36, I have a black wire, not a red/white wire.  Is this the wire I want?  Or do I need to find this connection somewhere else?

Answer 1

Hello,

A couple questions first please so I can provide accurate information:

- is the vehicle key or pts?

- are you using a t-harness? If so which one?

- is the vehicle based in the USA or Canada?

Best regards.

Comments

2018 subaru crosstrek push to start , in the usa ,useing evo one with t harness ,thar-one- sub2 ,connection at junction box you say should be a red/white wire, in that position i have a black wire . no red/white wire in the green plug, is there another location to hook up the yellow /red wire and yellow /green wire for immo data

---

Since you are in the usa, you are not connecting anything at the junction connector behind the fuse box.

You simply cut the jumper off the yellow/red & yellow/green, then run the loose yellow/red and yellow/green to the corresponding colors.

 

Im no artist but hopefully the drawing below will help explain it.