engine running confirmation FEEDBACK SIGNAL

Question

evo-all pts rav4 NOT hybride ...i can remotely start it using stand alone evo all using the -ve external trigger.

2 questions:

1- what should be the IDEAL pulse duration for external negative trigger? 500 ms or 2 sec or ..etc

2- when it runs>> which wire change its state so i can read its new state to cofirmat  that engine is started ? (imagine that i have two way remote and need A FEEDBACK SIGNAL from evo stating that it started)

- same for lock/unlock .. do we have a feedback signal? confirming if it is now locked or unlocked?

Answer 1

1- what should be the IDEAL pulse duration for external negative trigger? 500 ms or 2 sec or ..etc

.5 - 1 sec pulse. Test it yourself though. 

 

White/Red - goes to ground once remote started. It will also read ground from the car when steering lock disengages itself though. 

check in the non t-harness guide: https://cdn02.fortin.ca/download/58031/evo-all_ig_sal_bi_toy_rav4-nkto_2016_pts_c_58031.pdf

 

Green -  (-) unlock output

White -  (-) lock output