After programming, blue led keeps on blinking after ignition is turned to the off position. Remote start does not work.

Question

I used the Toy 3 t-harness and connected all the wires that the guide told me to.  I get to step 6 and when I turn the ignition to the off position, the blue led keeps on blinking.  The remote start does not work.

Answer 1

What vehicle?

what is the 12 digit service number of the module?

Comments

Sorry for the crappy vague question.  The vehicle is a 2016 Toyota Corolla S with the standard keyed ignition, not push to start.  The service number is: 002B07 145022.

---

Unit looks ok. 

Do a reset on it: https://cdn02.fortin.ca/en/download/61931/61931.pdf

reenable the bypass options, then reprogram it to the car.

 

You will also want to first verify that the YELLOW (A1) wire is connected to the PINK wire in the TOY3 harness and not the red. The red and pink wires in the toy3 harness can have almost the same tint. 

---

I checked where the yellow wire was terminated to and thankfully it was on the pink.  I also did the master reset which works. I'm glad it was something simple.

Thanks for your help, I appreciate it.