Mimic clutch engaged for Ready Mode

Question

My car does not have a connection for the clutch bypass on pin 51 at the BCM. What is the suggested workaround?  The Evo-One system requires the clutch to be depressed on start.

Rhis is a thar-vw3, Evo-One, with TB-VW install using 70161 guide. Everything works except the vehicle sensing the clutch depressed.  If i'm in the car  with the clutch engaged, remote start works

 

Thanks in advance

Answer 1

What is the year make and model of your vehicle?

 

Key start or Push Button Start?

Comments

2017 VW Jetta, 5-speed, standard key.

 

Thank you,

---

If it is not there then you would ned to go under the hood as follows:

Violet/Black or Violet/White: ECM next to underhood fuse box, 91 pinconnector, pin 62

You may also need to open this wire with a relay to interface properly with the clutch:

White/Red: ECM next to underhood fuse box, 91 pin connector, pin 61