2011 Explorer Parking Light Wires

Question

Have an EVO ALL with t harness.  Followed the wiring diagram pretty well hooking up.   The only wires other than the CAM wires that i spliced were the yellow and light blue wires from the 20 pin to the t harness.  I watched a couple you tube videos and read thru this forum, but for my vehicle, im not seeing much about the parking lights.  The parking light wiring on the wiring diagram I cannot follow.  Can you tell me what wire(s) i need to hook to the BCM and if any other wires need to be hooked up and to where, for the lights to work.   Thanks for your help!

Answer 1

Parking lights on your vehicle are done with a relay as shwon in the guide. The relay is not included. The evo-all puts out a negative output on the brown/white wire but the parking light wire in the vehicle is positive.

So you need to use a relay to switch the polarity making the negative output from brown/white, trigger the relay and turn it into a positive output.. Test the wire before connecting to it.

Comments

This is how it is wired up, this was taken from the guide for your vehicle.