2006 Mazda 3 (No Push Start)

Question

Fortin,

I've currently EVO-ALL w/T-Harness for my vechical.. Love it! I've talking my close friend to get one for his 2006 Mazda 3 he has order one arriving 12/03/2014 I'll be assisting him with the install read your .pdf lot of information can be confusing. My question is that is there easier way to install the EVO-ALL into his car since it doesn't have any harness adapter for install. Please point me in the right direction on which diagram should I be using/looking into. Thanks..

Stephen

Answer 1

Uh oh, I dunno what vehicle you had, but the installation on a Mazda 3 is completely if yours had a Tharness available. Mostly because you need a high current remote starter main unit and a bypass such as the EVO-ALL. You cannot only install a EVO-ALL in this vehicle. I'd recommend looking at Crimestopper RS remote starters to add into the picture.

Comments

So, you mean the EVO-ALL unit is not compatiable with my friend car which is an 2006 Mazda 3 Sedan automatic not even with wire color schematic/diagram and recommend he look into Crimestopper ADS-ALCA or RS unit for bypass remote start or both unit is require.

---

A remote starter installation requires 2 parts for this vehicle. A remote starter main unit of any brand and a transponder bypass and Can-Bus interface such as the EVO-ALL. A remote starter main unit is required since the vehicle ignition siwtch is high current.

 

What may be confusing is that you may be thinking that the EVO-ALL is a remote starter. It is not. :) It's a transponder bypass with Can-Bus drivers. In some vehicles the EVO-ALL will be able to also act as a remote starter; the feature is called stand alone remote starter (or 3x Lock Start).

---

Great ordering now an Crimestopper RS00-G5 unit to tap in the high power/current from the vechical transpinder connector behind the steering wheel then using the one/two port to connect to the EVO-ALL unit. Please point me in the right direction on which Connection 1-5 should I be looking at or study before I proceed the install. Thanks, Robert!

---

The EVO only does transponder bypasson in this vehicle, so connection 1.

The programming procedure (program 2) requires 2 valid master keys. If you do not have both original keys, you can use the 1-key programming procedure, program 6, but the Flash-Link is required so that you can use the DCryptor service.

The remote starter connections is where you will have some fun :)