dcryptor reset - Evo-All

Question

Can you please dcryptor reset my evo-all Service# 001A06 831101.

Hardware Vr:6

Firmware Vr: 4.18

Date 05/2018

 

It had been remote starting in my 2014 Audi Q5 with T-harness, the past few years.

I recently purchased RM411 one way remote to extend range farther than factory remote.

During programming on step 5 the yellow led will not light up or the antenna blue led flashing. Not sure if RF kit setting to H2 is ok, of if this matters. Tried both H1 and H2 in setting, no difference when trying to program. Firmware: 60.10

So, I master reset the evo-all to start over with settings and dcryptor. Received error message “dcryptor limit has been reached for this car”?

Any suggestions for programming RM411, after getting remote start working with factory remote?

Answer 1

I have sent the request to have the limit reset. It will be ready for use within 24 hours.

 

As far as the 411 goes, Ensure option H & H2  is ON. Along with your regular A1-A11, C1, D1 etc.

Then follow this programming:

https://fortin.ca/download/69291/rfk411-install-guide-69291.pdf

 

If you are still having difficulties pairing them give us a call at 1-877-336-7797.