2007 FJ no ignition indication (yellow led)

Question

EVO-ONE THAR-ONE-TOY1 w/ RF641W - 2007 FJ Cruiser cannot program the RF reveiver.  No transponder connection no TX or RX connection on vehicle, cannot complete module program.  Tried to program RF but it will not.  No yellow LED / igination indication.  Tested wire connection good.  Please advise.  Crutchfield is also working this.  Please help.  Thank you!

Answer 1

The module needs 3 things to enter programming. power, ground and ignition.

Does the module enter valet mode if you try? To enter/exit valet its key on, 3x on the valet switch, key off. The RED led on the side of the unit should turn on solid when in valet mode and be off when its out of valet mode.

 

Alot of times its the brake wire people mess up on and it prevents the module from entering pairing mode. I would double check your black wire on the 20 pin connector.

Comments

Thank you!