Questions & Answers

volkswagen 2010 jetta, 3x lock oem fob remote start vehicle ok, but quit in 3 seconds

0 votes
Hi, i installed an evo-all to my volkswagen jetta 2010 using standalone guide sacrifice 1 key (wrap) 3x lock on oem fob to start vehicle. the wiring seems ok, evo-all got programmed, i press lock on oem fob and vehicle fire up run for 3 seconds and die, and vehicle attempt it self once more starts and did the same run for 3 seconds and die, what would be causing the issue why it wont stay up running? firmware inside 75.[41] hardware is 7.0 is this ok? the one on the guide says firmware is 75.[35] and hardware is 6. would this be matter? inside bypass option C1, D1, D2 is On what else could be the issue causing the vehicle not staying running after remote started?

Thankyou!
asked Nov 28, 2020 in Volkswagen by Rogelio Abraham2 (270 points)

1 Answer

0 votes
Hi all,

Got it fixed!  I knew I got all cannection and programming ok, and it supposed to work properly which it did, the only reason it shuting down is because it cant detect the sacrificed key placed a little bit far from transponder. This can also be notice from the dash saying No Key when remote started and run die for 3 seconds. Placing sacrificed key closer to the ignition barrel or transponder solve the problem. One way to find out aswell is to reconnect the blue wire of transponder then try to remote start if it does start and stay then you know the sacrificed key wasnt wrap properly.
answered Nov 28, 2020 by Rogelio Abraham2 (270 points)
edited Nov 28, 2020 by Rogelio Abraham2
What wire did you used to wrap key? Same wire from module or separate new longer and connected to module wires?
...