G35 OEM alarm not arming (turning on)

Question

Hello all. I have a 2005 Infiniti G35 (automatic; not intellikey, not push start) and I just installed a Fortin EVO-ONE with the NIS2 T-Harness and a Compustar Slice Remote. I can lock, unlock, release the trunk, and remote start/stop the car. My problem is that the OEM Alarm doesn't seem to turn on when I lock the car. The alarm no longer activates when the car is manually unlocked from inside and opened. Regarding connected wires:

• A8 (Dk. Blue) (- GRW) is not connected to anything
• A15 (Pink/Black) (- Hood pin) is not connected to anything
• D6 (White/Red) (Security light) is not connected to anything
• D4 (White/Green) (Security light) is not connected to anything
• Lt. Blue on the T-Harness isn't connected to anything
• Lt. Blue/Black on the T-Harness isn't connected to anything
• I cut the security light wire in the g35 (identified via wirecolor diagrams). The wires aren't connected to anything.

Is there anything I'm missing or do I have to turn on a specific setting via Flashlink Updater 2 (which I have)?

Thanks in advance for your help.

Answer 1

You need to connect lock/arm and unlock/disarm from the evo (purple & purple/white wires) to the lock unlock wires in the car.

Once you do this turn off option A1 in the bypass and you will be able to arm/disarm the oem alarm from the after market remote.

Comments

Ah, it's that last step I didn't do. Do I need to unplug everything from the evo one before flashing it or can I leave everything plugged in and just connect the flashlink 2 updater to it?

---

Unplug the evo from the vehicle when hooking it up to the flash link.

---

Turning off the option A1 in bypass made the evo one no longer respond to lock and unlock commands from my aaftermarket/compustar remote. Is that normal? I turned it back on so that the evo one would respond to my compustar remote again.