Evo one to xl202 LED

Question

I have an Evo One connected to a xl202.  In the instructions I see there is a wire on another port/wire for the (-)LED. where/what wire do I connect that to on a model 6826T antenna to make the LED on the antenna work?

Answer 1

Hello.

 i have the same setup. I singled out the pink cable from the 6826T and connected as shown in the EVo One + XL202 Doc. ( Guide no 25331). It works perfectly. Hope this helps.

Best Regards.

Comments

Hi Pat,

Thank you for the comment.  I just want to  make sure I understand you correctly.  You took the wire shown in the document and in-line spliced it to the pink wire on 6826T, and then the blue LED on the 6826T worked?

---

The pink wire comes from the 6826T. I connected this to the last pin of the second blue connector of the EVO One.

Answer 2

That is for an external led, not the led on the antenna.