Car doesn't start after wiring evo-one

Question

After wiring the evo-one, the guide states to make sure the vehicle starts before proceeding with programming (dcryptor). When I press the PTS button, it cranks once but doesn't start. If I press once again, I hear a click (sounds like a relay), but it doesn't even crank. I pressed again several times (15+), but there's nothing but a click (relay). I tried to disconnect the evo-one and the car crank but doesn't start neither... I triple check the wiring and everything seems fine. Any idea please?

Answer 1

Verify all fuse in the vehicle to make sure none are blown. If the car is manual you must press brake AND clutch to start the vehicle. If the car is automatic, press the brake and then the PTS, do not turn the ignition first before starting.

Comments

The fuse were not blown.

I just kept trying to start again and again and it finally did.

Thanks.